Las guías perfiladas desarrolladas con sistemas de medición integrados se presentan como soluciones rentables para las aplicaciones más variadas que requieren una gran calidad.
¿Tiene alguna pregunta acerca de este producto? No dude en enviarnos un mensaje. Nuestros representantes de ventas estarán encantados de ayudarle.
MONORAIL AMSD 4A es un sistema de medición magnetorresistiva integrado basado en la guía perfilada MONORAIL BM, con una interfaz incremental digital. AMSA 4A es el punto de partida de este producto. Los raíles de sección son, por tanto, idénticos y compatibles tanto con AMSA 4A como con AMSD 4A.
La versión AMSD 4A tiene una interfaz incremental digital y una serie de opciones para el cabezal de lectura que permiten varias resoluciones y la adaptación del sistema a mecanismos de control con frecuencias de entrada diferentes.
After installing an AMSD system, the absolute position is available immediately after a reference run once the system is powered on.
When replacing read heads, slight deviations of up to a few tenths of a millimeter may occur. If more precise values are needed, adjustments to the control parameters should be made.
The AMSD system outputs the configured maximum frequency even when stationary. The control receiver must always be capable of receiving this maximum frequency.
Precise alignment of the read head is not necessary. It is sufficient to securely fasten it with the screws provided.
The periodic deviation is less than 0.8 µm, ensuring high precision.
The scale of the AMSD system is protected within the rail. External fields are shielded by the construction of the rail and surrounding components, so no interference occurs.
It is recommended to mount the scale on the side opposite the linear motor to prevent magnetic fluxes from chips or tools from affecting the scale.
Magnetic lifting tools should not be used when installing AMSD rails to avoid residual magnetism in the rail.
All components from the MONORAIL MR and MONORAIL BM series are compatible with the AMSD system. However, it should be noted that sheet metal wipers are not included in the standard program.
After installing an AMSD system, the absolute position is available immediately after a reference run once the system is powered on.
When replacing read heads, slight deviations of up to a few tenths of a millimeter may occur. If more precise values are needed, adjustments to the control parameters should be made.
The AMSD system outputs the configured maximum frequency even when stationary. The control receiver must always be capable of receiving this maximum frequency.
Precise alignment of the read head is not necessary. It is sufficient to securely fasten it with the screws provided.
The periodic deviation is less than 0.8 µm, ensuring high precision.
The scale of the AMSD system is protected within the rail. External fields are shielded by the construction of the rail and surrounding components, so no interference occurs.
It is recommended to mount the scale on the side opposite the linear motor to prevent magnetic fluxes from chips or tools from affecting the scale.
Magnetic lifting tools should not be used when installing AMSD rails to avoid residual magnetism in the rail.
All components from the MONORAIL MR and MONORAIL BM series are compatible with the AMSD system. However, it should be noted that sheet metal wipers are not included in the standard program.
Los sistemas de medición digitales y analógicos permiten movimientos lineales exactos y respetan las tolerancias más estrechas
 |  |  | | | |  |  |  | |
|---|---|---|---|---|---|---|---|---|---|
| Tipo AMSA 3B | Tipo AMSD 3B | Tipo AMSA 4B | Tipo AMSD 4B | Tipo AMSABS 3B | Tipo AMSABS 4B | Tipo AMSA 3L | Tipo MINISCALE PLUS | Tipo MINISLIDE MSQscale | |
| más | más | más | más | más | más | más | más | ||
| Magnetorresistivo |  | | | | | | | ||
| Óptico | | | |||||||
| Utilizable con MONORAIL MR | | | | | |||||
| Utilizable con MONORAIL BM | | | | ||||||
| Utilizable con MINIRAIL |
| ||||||||
| Método de medición incremental | | | | | | | | ||
| Método de medición absoluto | | | |||||||
| Utilizable con MSQ | |
100% mejor opción
75%
50%
25% buena opción
0%Dimensions and capacities
Links to the following sizes:
AMSD 4B 15 digital with balls
AMSD 4B 20 digital with balls
AMSD 4B 25 digital with balls
AMSD 4B 30 digital with balls
AMSD 4B 35 digital with balls
AMSD 4B 45 digital with balls
Dimensions and capacities
Links to the following sizes:
AMSD 4B 15 digital with balls
AMSD 4B 20 digital with balls
AMSD 4B 25 digital with balls
AMSD 4B 30 digital with balls
AMSD 4B 35 digital with balls
AMSD 4B 45 digital with balls
Los requisitos de nuestros clientes:
Un sistema de medición de distancias que ahorre espacio, sea fácil de montar y esté cerca del proceso de mecanizado.
Nuestra solución:
Un sistema de medición de distancias integrado: alta precisión, fiable y con poco mantenimiento.
El tamaño seleccionado puede configurarse y se encuentra disponible en todos los formatos de datos convencionales
Haga clic en la combinación de tamaño correspondiente para comenzar la descarga.
SCHNEEBERGER ofrece una amplia gama de servicios de reparación, mantenimiento y soporte técnico
SCHNEEBERGER GmbH
Höfen, Germany
Línea directa +49 7081 782 272
Fax +49 (0)7081 782 124
EE.UU.
